建站
咨詢
售后
建站咨詢
新聞中心
（一）安裝JDK
創新互聯建站主要從事成都網站建設、做網站、網頁設計、企業做網站、公司建網站等業務。立足成都服務阿克蘇,10多年網站建設經驗,價格優惠、服務專業,歡迎來電咨詢建站服務:13518219792
1. 終端輸入：apt-cache search openjdk
運行結果：
2.這里我們安裝openjdk-8-jdk，因為我安裝openjdk-9-jdk的時候有出錯。
運行安裝命令：
sudo apt-get install openjdk-8-jdk
3.測試是否安裝成功：java -version
4.配置java_home變量:
運行：echo export JAVA_HOME="/usr/lib/jvm/Java-8-openjdk-amd64/">>~/.bashrc 添加變量
source .bashrc 使變量生效
（二）安裝red5
1.下載red5 Linux 安裝包：https://github.com/Red5/red5-server/releases ，國外網站，下載很慢
red5-server-1.0.9-M6也可以到主機寶貝1號FTP服務器下載
在 2017年LinuxIDC.com/9月/Ubuntu 16.04 安裝搭建Red5流媒體服務器/
2.創建目錄：
mkdir -p /usr/share/red5
3.設置環境變量：
export RED5_HOME=/usr/share/red5
4.將安裝包解壓到目錄
/usr/share/red5
5. 開始運行red5
cd /usr/share/red5
./red5.sh &
6.結束運行red5
cd /usr/share/red5
./red5-shutdown.sh
安裝結束
測試red5是否安裝成功：
（1）運行red5
（2）瀏覽器輸入：本地IP:5080
比如我的IP地址為192.168.0.6，則輸入：http://192.168.0.6:5080/ 出現下面界面表示安裝成功。
附啟動腳本
Configure init script
#!/bin/sh
#
# /etc/init.d/red5 -- startup script for the red5 server
#
# Based on the tomcat6 init script.
# Written by Miquel van Smoorenburg
# Modified for Ubuntu red5 by Fred Dixon
# Modified for Debian GNU/Linux by Ian Murdock
# Modified for Tomcat by Stefan Gybas
# Modified for Tomcat6 by Thierry Carrez
#
### BEGIN INIT INFO
# Provides: red5
# Required-Start: $local_fs $remote_fs $network
# Required-Stop: $local_fs $remote_fs $network
# Should-Start: $named
# Should-Stop: $named
# Default-Start: 2 3 4 5
# Default-Stop: 1
# Short-Description: Start red5.
# Description: Start the red5 service.
### END INIT INFO
set -e
PATH=/bin:/usr/bin:/sbin:/usr/sbin
NAME=red5
DESC="Red5 Server"
RED5_HOME=/mnt/opt/$NAME
DEFAULT=/etc/default/$NAME
UMASK=0002
# These variables are needed by Xuggler
export XUGGLE_HOME=/usr/local
export PATH=$PATH:$XUGGLE_HOME/bin
export LD_LIBRARY_PATH=$XUGGLE_HOME/lib:$LD_LIBRARY_PATH
if [ `id -u` -ne 0 ]; then
echo "You need root privileges to run this script"
exit 1
fi
# Make sure red5 is started with system locale
if [ -r /etc/default/locale ]; then
. /etc/default/locale
export LANG
fi
. /lib/lsb/init-functions
. /etc/default/rcS
# The following variables can be overwritten in $DEFAULT
# The first existing directory is used for JAVA_HOME (if JAVA_HOME is not
# defined in $DEFAULT)
JDK_DIRS="/usr/lib/jvm/java-6-openjdk /usr/lib/jvm/java-6-sun /usr/lib/jvm/java-1.5.0-sun /usr/lib/j2sdk1.5-sun /usr/lib/j2sdk1.5-ibm"
# Look for the right JVM to use
for jdir in $JDK_DIRS; do
if [ -r "$jdir/bin/java" -a -z "${JAVA_HOME}" ]; then
JAVA_HOME="$jdir"
fi
done
export JAVA_HOME
# Output file
if [ -z "$OUT_FILE" ]; then
OUT_FILE=/var/log/red5.out
fi
# End of variables that can be overwritten in $DEFAULT
# overwrite settings from default file
if [ -f "$DEFAULT" ]; then
. "$DEFAULT"
fi
if [ ! -f "$RED5_HOME/red5.jar" ]; then
log_failure_msg "$NAME is not installed"
exit 1
fi
#
# Function to wait if there are connections still open for 1935. Some browsers hang on to a connection
# that prevents a ./red5 restart from binding to port 1935
#
wait_1935_close () {
ACTIVE=$(netstat -ant | grep 1935 | wc | awk -F ' ' '{print $1}')
if [ $ACTIVE != 0 ]; then
echo -n " Waiting for $ACTIVE connections on 1935 to close before starting Red5 "
while [ $ACTIVE != 0 ]; do
echo -n "."
sleep 5
ACTIVE=$(netstat -ant | grep 1935 | wc | awk -F ' ' '{print $1}')
done
fi
echo
}
# Define other required variables
RED5_PID="/var/run/$NAME.pid"
RED5_MAINCLASS=org.red5.server.Bootstrap
RED5_CLASSPATH="$RED5_HOME/boot.jar:$RED5_HOME/conf:$RED5_HOME/lib/ejb3-persistence.jar"
JAVA_OPTS="-Dpython.home=lib -Xms128M -Xmx128M -Dred5.root=$RED5_HOME -Dlogback.ContextSelector=org.red5.logging.LoggingContextSelector -Dcatalina.useNaming=true -Djava.security.debug=failure -cp $RED5_CLASSPATH org.red5.server.Bootstrap"
case "$1" in
start)
if [ -z "$JAVA_HOME" ]; then
log_failure_msg "no JDK found - please set JAVA_HOME"
exit 1
fi
if [ ! -d "$RED5_HOME/conf" ]; then
log_failure_msg "invalid RED5_HOME: $RED5_HOME"
exit 1
fi
log_daemon_msg "Starting $DESC" "$NAME"
if start-stop-daemon --start --test --pidfile $RED5_PID \
--startas "$JAVA_HOME/bin/java" \
>/dev/null; then
wait_1935_close
start-stop-daemon --start --background --make-pidfile --chuid red5 --umask $UMASK \
--chdir $RED5_HOME --pidfile $RED5_PID --startas "$JAVA_HOME/bin/java" -- $JAVA_OPTS
sleep 5
# Because we pushed it into the background, we need to check it's status
if start-stop-daemon --test --start --pidfile $RED5_PID --startas "$JAVA_HOME/bin/java" >/dev/null; then
log_end_msg 1
else
log_end_msg 0
fi
else
log_progress_msg "(already running)"
log_end_msg 0
fi
;;
stop)
log_daemon_msg "Stopping $DESC" "$NAME"
if start-stop-daemon --start --test --pidfile $RED5_PID \
--startas "$JAVA_HOME/bin/java" \
>/dev/null; then
log_progress_msg "(not running)"
else
start-stop-daemon --stop --pidfile $RED5_PID \
--startas "$JAVA_HOME/bin/java"
sleep 5
rm -f $RED5_PID
fi
log_end_msg 0
;;
status)
if start-stop-daemon --start --test --pidfile $RED5_PID \
--startas "$JAVA_HOME/bin/java" \
>/dev/null; then
if [ -f "$RED5_PID" ]; then
log_success_msg "$DESC is not running, but pid file exists."
exit 1
else
log_success_msg "$DESC is not running."
exit 3
fi
else
log_success_msg "$DESC is running with pid `cat $RED5_PID`"
fi
;;
restart|force-reload)
if start-stop-daemon --test --stop --pidfile "$RED5_PID" \
--startas "$JAVA_HOME/bin/java" \
>/dev/null; then
$0 stop
sleep 1
fi
$0 start
;;
*)
log_success_msg "Usage: $0 {start|stop|restart|force-reload|status}"
exit 1
;;
esac
exit 0
網頁題目：Ubuntu16.04安裝搭建Red5流媒體服務器
分享路徑：http://www.5511xx.com/article/cdpcpid.html
